how to install carpet on concrete floor in JOSEPHINE how to install carpet on concrete floor JOSEPHINE

how to install carpet on concrete floor in JOSEPHINE

how to install carpet on concrete floor JOSEPHINE

how to install carpet on concrete floor in JOSEPHINE.Take these measurements to your carpet dealer to make sure you get ample carpeting for your job.
Be sure to tell them that you are carpeting over concrete since that requires slightly different tools than carpeting over wooden surfaces.
You should do this a week or more prior to carpet installation day to allow plenty of time for the waterproofing to be done.
Remove any doors for ease of installation.
You might have to sand down the bottom of the doors to ensure smooth closing after the carpet installation.
Clean the concrete thoroughly, using the appropriate cleaner for the stains you find.
Follow the washing with a mold and bacteria killing solution of 1 part household bleach to 15 parts water.
Rinse thoroughly with clean water.
Before the surface dries, fill in any holes or cracks, making sure the top of the repair is level with the rest of the concrete surface.
Coat the floor with a primer suited to work with the carpet adhesive you will be using.
Consult the personnel at the store where you purchase your carpet to ensure you have the correct product for your type of carpeting.
The primer can be applied with an extended handle paint roller or using a paint brush.
Be sure that the room is well ventilated, especially if using an oil based primer.
Cut a piece of tackless gripper strip the length of 1 wall with a utility knife, and attach it to the floor with masonry nails.
The tack points should be facing the wall.
This is where you will tuck the edges of the carpet during installation.
Cut padding strips the length of the room, and place them side by side across the room.
Glue the padding, waffled side up, with a carpet glue.
Keep rows abutted, and cover seams with duct tape.
Trim any excess with a utility knife.
Place seam tape, adhesive side up, where pieces abut.
Use a steam iron to activate the adhesive and join the pieces together.
Lay carpet out and use a rented knee kicker to force the carpet into 1 corner.
Using the power stretcher, stretch the carpet across the room to the opposite wall.
Hook the carpet onto the tackless strip.
Continue this until the carpeting is smooth and flat.
Cut off excess carpet, and push carpet behind tackless strip, using a wide blade putty knife if necessary.
Cover edge of carpeting at doorways with metal door jambs and replace doors.
Finish off with baseboards of your choice.
how to install carpet on concrete floor in LA PORTE how to install
carpet on concrete floor LA PORTE